Appliances Deal Alert Specials Building Products Electrical Paint Center Plumbing Tile Gallery Tool Center
  Your quote basket has 0 Item (s)

Featured Product

Martin Senour Paints Tough Coat™ Alkyd Flat Enamel

Martin Senour Paints   Tough Coat™ Alkyd Flat Enamel

Product Information

Product Code: 434-01-75100

Description: Medium oil/alkyd all purpose enamel designed for commercial and industrial maintenance applications. This formulation provides fast drying for minimal equipment down time and gives a durable corrosion resistant finish in light to moderate industrial environment.
Where To Use: Use this product on interior and exterior surfaces such as walls, machinery and equipment, storage tanks, piping, doors and trim made of steel, iron, aluminum and galvanized metal, concrete, brick, block, masonry, drywall, plaster and wood.
Application: Stir paint well. Thinning not required. If using more than one gallon, mix them together in one container for color consistency. When tinted, confirm color suitability before application by testing on a small area. Do not apply this product when air, surface or product temperature is below 50 degrees Fahrenheit, if temperatures might drop to this level with in 4 hours after application, if rain is forecasted within 4 hours or if dew is likely to occur. Do not apply in direct sunlight or on a hot surface.
Coverage: 1 Gallon covers up to 400 square feet over smooth surfaces.
Dry Time:@ 77F, 50% RH (Relative Humidity)
To Touch: 2-4 hours
To Recoat: 24 hours
Sizes Available: Quart, 1 Gallon
Color: Black, White, Flat Black
Stock #: 434-01-75100  to  434-01-75200


Tell a Friend
Write Review/Comments


Quantity: Request Quote
previous page


Martin Senour Paint



Careers at Benny's

Popular Products