Appliances Blue Light Specials Building Products Electrical Paint Center Plumbing Tile Gallery Tool Center
  Your quote basket has 0 Item (s)

Featured Product

Coronado Industrial Coatings™ Corotile Quick Dry Enamel

Coronado   Industrial Coatings™ Corotile Quick Dry Enamel

Product Information

Product Code: 434-01-53072

Description: COROTILE® Quick Dry Alkyd is designed for shop application on metal substrates where speedy drying time, extremely high gloss, and fast recoat times are desired. This product may be used in interior or exterior applications. A full line of bases as well as ready mixed colors are available to reach any color desired. The addition of 1 pint per gallon converter may be added to increase the gloss retention, and abrasion and chemical resistance of this product; however this additive is not required. 
Where To Use: Shop Application on Ferrous Metal / Iron Substrates. Use in shop application facilities in the fabrication market. Also ideal for use in the industrial refurbishment market as an implement, dumpster, machinery, or construction enamel. May also be used on properly prepared and primed wood, concrete or composition board. Not recommended for immersion or contact with strong solvents.
Application: Mix the product thoroughly before application. The use of a drill mixer at low speed will best accomplish this task. At temperatures above 90°F, or in very low humidity (less than 30%), this product may dry extremely fast, and the use of a slower solvent (High Flash Naphtha) may be required as a thinner. Application in normal temperatures (45 to 90°F) or normal humidity (30 to 85%) should not require thinning; however, small amounts of xylene may be used if necessary.
  • Airless Spray (Preferred Method): Tip range between 13 and 17 thousandths. Total fluid output pressure at tip should not be less than 2100 psi.
  • Air Spray (Pressure Pot): DeVilbis MBC or JGA gun, with 704 or 765 air cap and Fluid Tip E. NOTE: Do not allow material to remain in hoses, gun or spray equipment. Thoroughly flush all equipment with recommended thinner.
  • Brush: Natural Bristle for small areas only due to fast dry nature of this product.
  • Roller: Industrial Cover with Phenolic core for small areas only due to fast dry nature of this product.
Coverage: 350 - 450 square feet per gallon
Dry Time:  Dries to touch:  1Hour @ 55° F,   10 Minutes @ 77° F,   5 Minutes @ 100° F
Re-coat: 6 Hours @ 55° F,   2 Hours @ 77° F,  1 Hour @ 100° F
Sizes Available: 1 Gallon
Color: OSHA Yellow

Tell a Friend
Write Review/Comments

Quantity: Request Quote
previous page


Careers at Benny's

Popular Products